CONSTRUCTIVE 
 
 COPYRIOHTED iai6 
 ART SPECIALTY CO., BOSTON. MASS 
 
CONSTl 
 
 WICKEP 
 
 JCTIVE 
 
 C RA FT 
 
 PARLOR SE 
 4 CHAIRS, TABLE. 
 
 The illustrations on the 
 the different toy pieces completed, 
 have all curves and bends equal in 
 parts come uniform. 
 
 In making short curves, wetfche 
 to make them pliable and prevent l 
 
 To color set, use water or tu 
 
 g)C 
 
 ". 7 PIECES 
 ETTEE. TABORET 
 
 foifowing pages show actual sizes of 
 Follow the designs very closely; 
 ize, in order to have the various 
 
 reeds thoroughly before using 
 "eaking. 
 pentine stains. 
 
 K- ; 
 
 :«?1'' 
 
A^ 
 
 \^ 
 
 The scale below gives lengths of ree 
 
 ds to be used for the different parts. 
 
 Back, arms and legs for chairs and settee, also l<,gs for table. 
 
 Side-pieces for table. 
 
 Taboret legs. 
 
 Table-top pieces and front centre-piece for settee|. 
 
 Front braces for chairs and settee. 
 
 Centre-pin for taboret. 
 
INSTRUCTION 
 
 FOR MAKING 
 
 CHAIRS AND SETTE^ — Form loops for backs, pressing 
 the ends of reeds into the drilled Ijioles even with the bottom of the 
 seat, interlacing each loop ; for the| arms and legs use the same length 
 of reed, curving the centre to formj the arms and threading the ends 
 through the seat for legs; next prei'S the front leg-braces into the drilled 
 holes and bend to meet front leg, I placing the medium sized wooden 
 ball over the brace and leg to holcj them- in place. 
 
 Finish the settee by inserting front centre piece. 
 
 AUG 25 IS 
 
 15 
 
■4- CHAIRS 
 
TABLE — To make the lees, form a loop as m th i i r , . i ^^ 
 
 ,, , , 1 n 1 1 r 1 ' back of chairs and settee, 
 
 passmg the large wooden ball over the ends to the cer ,. ., j ^l i 
 
 ,• 1 , , • ,-,,,,, , , ,. ^'■^; the" spread the ends 
 
 shehtly and press mto drilled holes under the table-top;: r. i • ^l r i 
 
 °. . ■' ^ , . , . , . , , . , "er placms; the four legs m 
 
 position, curve the side-pieces and insert the ends in the , u n l • ^ 
 
 ^ , , . / ,. „ „ , , . wooden ball, having them 
 
 protrude as shown in the diagram. Follow the design ^^^ ^j^^ table-top border. 
 
 TABORET— Curve reed 
 for the legs, placing the ends 
 in the outer drilled holes on 
 each side; insert the centre 
 pins and fasten the small 
 wooden balls on the ends. 
 
LIBRARY OF CONGRESS 
 
 1 III ll|lll llll{||ll|||ll|!ll||lll|||!| 
 
 ill 1 
 
 II 1 
 
 1 
 
 1 1 li 
 
 lil 
 
 mil II 
 
 014 521 585 7 #